Best Printer Cleaning Kit for Epson, HP | Brother Inkjet Printhead Cleaning Kit | Inkjet Printer Head Cleaner | Printer Head Cleaning Kit with LARGE 20ml Syringe - 100ml Printer Cleaning Fluid

Great product for cleaning an inkjet printhead. Be aware it is messy.

Worked as advertised. Not a project for the faint of heart, non-technically inclined, or impatient type, but with simple tools, a bit of diligent planning and patient, careful work, this totally revived my Epson ET-2500 Eco-Tank printer's quality of output. It's been a great printer, so I was happy to not have to replace it. I should have ordered the replacement waste ink reservoir sponges, but chose to wash & dry mine instead. That took an extra day. With a fresh supply of ink in the tanks, the trusty Epson is back in business and working great.

Arrived on time and in good condition. Worked great but could not revive a bad printhead. Worth trying though.

This is exactly what I needed to get my Canon Pixma printer working again when the black stopped working and none of the printer maintenance options worked. My only gripe is the instructions aren’t very good, but at least there’s YouTube.

I purchased this kit to resolve a print issue with my HP Officejet Pro. The blue ink jet was not printing enough ink to allow proper color printing. So I tried to use this kit to resolve this issue. I tried cleaning the jets, but it did nothing for the blue. So, I heated the solution as suggested, and tried clearing the blue jet with warm solution, but no luck. I also allowed the solution to sit on the blue jet for three days. Still no luck! The other thing I found is you had better hold the adaptors in place or they slip right off when trying to push the solution from the supplied syringe, which makes a mess. I do not know what the oily surfactant solution is that is used in this kit, but it seemed like isopropyl alcohol worked better at dissolving died ink at the areas where the ink cartridges connected into the print head cradle. From my experience, this kit was a waste of money.

We had two printers that needed to be cleaned. One printer was the Brother MFC-J835DW and an Epson XP-446. After watching the video on how to clean the printers, both printers printing issue did not resolve. For the Brother, the black ink still would not print. After examining the line, we noticed the black ink was not flowing at all, as if there was no seal allowing the ink to flow through the line. The colored ink flowed freely and printed with no issue. For the Epson, we got it to print but the print head was causing it to smear the colored ink then all of a sudden the printer shut down and would not turn back on. Both printers we have to recycle now.The solution does work, but beware it may not resolve the issue at all. The only way you can fully clean the print head is to remove the print head and flush the fluid through it, if possible. I think the print head was damaged after cleaning it on the Epson printer due to it rubbing against the paper towel, hence the smeared ink when printing. The cost for the actual product is too high. You get everything you need, but the bottle of solution is enough to clean just one printer one time. I would not attempt to clean the printer, but just buy a new one.

Why did you pick this product vs others?:Because of what was included in the kit and the fact that it addresses a little-known maintenance need for the EcoTank printers. Ease of use:I’m technical but I still found the online video instructions helpful (search that “tube” video site for The Printer Guy or @BestPrinters)Cleaning ability:My printer went from zero black ink making it to a page to absolutely sharp, clear printing of all colors again. I even tested photo printing (which I had never done before on this printer) and it was gorgeous! You cannot go wrong with this product. Just follow the instructions and wait 24 hours for it all to dry properly before printing after cleaning. For my Epson EcoTank, replacing the part called the Maintenance Box was an important second part of this journey.

I used this on my Canon TR8620 and it worked like a charm. All but two jets were working poorly or not at all. I ended up cleaning four jets, all except the main jet for PGBK, which sees by far the most use. I used one 20ml syringe full, 5ml per jet. Now the nozzle check looks perfect. A few suggestions: (1) Change the paper towel under the printhead for every 5-10ml of solution you squirt through the jets. I ended up soaking the highly porous sponge like material under the paper towel. I actually took that out and rinsed it out. (2) The yellow adapter does not really fit over the smaller jets. I had to hold it firmly in place or most solution would have leaked. As I expect to use this again in the future for the same printer (3) please provide refill bottles for the solution. I would hate to needlessly buy all those plastic parts again and through the old ones in the trash.